Albedo100 Permanent Reflective Spray
Albedo100 Permanent is a transparent spray with light-reflective properties that sticks to most surfaces, and resists wind and rain. The spray is UV-resistant and is durable on most materials. It's perfect for spraying bikes, scooters and any hardware that might be used in low light.
Make sure the object to be sprayed is dry, and that dirt, grease and other loose particles are removed before application. The spray attaches to dry surfaces. Some surfaces and certain plastics may need to be treated with a primer before use in order to achieve optimum and durable results over time. Pliable surfaces may stiffen if sprayed with Albedo100 Permanent Transparent. You can easily create reflective signs and symbols by cutting out, and spraying on with stencils.
Albedo100 Permanent is a quick-drying lacquer that is transparent in daylight and light-reflective in the dark. The spray reflects in the same direction as the light source. This means it is only the person behind the light source that can see the reflection. Test the effect by shining a light, held at eye-level, upon the sprayed surface. Alternatively taking a photo with flash e.g with your mobile phone camera, or watching the object from a car with the headlights on, from a distance. Albedo100 Light Metallic is a permanent spray. However, in some cases it can be removed using white spirit.
White spirit can affect the original paint work.
- Always spray outside or in well-ventilated areas. Shake the can vigorously +1 minute (at least 20 sec after you hear the bulb inside). Repeat during application.
- After shaking, spray immediately from a distance of approximately 1 foot, with even swiping movements. Hold the can upright while spraying. Do not over-apply. Dries in a couple of minutes at normal room temperature.
- Clean the nozzle after use, by spraying upside down for 1-2 sec.
Important: The spray disappears when washed, and does not effect the colour or surface of the textile. The spray lasts for approximately a week after application, depending on what surface you spray on, how much you apply and how often the garment is worn. In cases of heavy wearing you should add more spray continuously for full effect, or regularly check the reflective effect. The reflective effect can easily be controlled by shining a light, held at eye-level, on the sprayed surface or taking a photo with flash. E.g with your mobile phone camera. You can easily create reflective signs and symbols by cutting out, and spraying on stencils.
|Usage||Hard goods, bikes, helmets, frames|